traefikee Command-Line Reference

The traefikee command-line manages the elements in your Traefik Enterprise cluster.

Synopsis

Check below the list of commands, with their respective flags.

traefikee    Traefik Enterprise (Enterprise Edition) is a Cloud Native Edge Routing Platform based on Traefik Proxy,
a modern HTTP reverse proxy and load balancer made to deploy microservices with ease.
Complete documentation is available at https://doc.traefik.io.

Usage: traefikee [command] [resource] [flags]

Use "traefikee [command] --help" for help on any command.

Commands:
    controller    Start a new controller
    proxy         Start a new proxy
    tokens        Get tokens from the cluster
    version       Print version

Commands

The Traefik Enterprise command-line (CLI) provides the following commands:

Start Controller (controller)

This command starts a controller and joins it to a cluster.

Usage:

traefikee controller --name="controller-0" --advertise=172.17.0.2:4242 --discovery.static.peers=172.17.0.1:4242,172.17.0.3:4242,172.17.0.4:4242 --license="XXX" --api.bundle="./bundle.zip"

Flags:

--advertise
    Address to advertise to peers

--api.addr  (Default: ":55055")
    Address to listen on for the API

--api.autocerts  (Default: "false")
    Generate the required mTLS certificates to access the cluster API with teectl

--api.bundle
    Specify a certificate bundle to access the cluster API with teectl

--api.socket  (Default: "/var/run/traefikee/teectl.sock")
    Socket to listen on for the API

--bind  (Default: "0.0.0.0:4242")
    Address to listen for peers on

--configfile
    Static Configuration file to use. If specified the controllers will watch it for modifications.

--discovery.dns.bootstrapexpected  (Default: "0")
    Number of controllers needed to bootstrap the cluster (DNS Discovery Only)

--discovery.dns.domain
    Domain where the controllers are exposed

--discovery.dns.port
    Port where the discovered controller can be contacted on

--discovery.static.peers
    Comma separated list of peers to connect to

--jointoken.file.path  (Default: "/var/run/secrets")
    The path to the join tokens

--jointoken.kubernetes.namespace
    The kubernetes namespace of the join tokens

--jointoken.kubernetes.prefix
    The prefix for join token naming

--jointoken.swarm.certpath
    Path to the mTLS certificates

--jointoken.swarm.endpoint
    Endpoint to use to access the swarm API

--jointoken.swarm.prefix
    The prefix for join token naming

--jointoken.value
    The value of the join token

--license
    License key to use

--log.filepath
    Log file path. Stdout is used when omitted or empty.

--log.format
    Log format: json | common

--log.level
    Log level set to restrict logs to logs.

--name  (Default: "hostname reported by the kernel")
    Name of the node

--socket  (Default: "/var/run/traefikee/cluster.sock")
    Path to the control socket

--statedir  (Default: "/var/lib/traefikee")
    Path to the state directory

Start Proxy (proxy)

This command starts a proxy and joins it to a cluster.

Usage:

traefikee proxy --name="proxy-0" --discovery.static.peers=172.17.0.1:4242,172.17.0.3:4242,172.17.0.4:4242

Flags:

--discovery.dns.domain
    Domain where the controllers are exposed

--discovery.dns.port
    Port where the discovered server can be contacted

--discovery.static.peers
    Comma separated list of peers to join

--distributed.listen  (Default: ":8484")
    Address to listen to for distributed features

--jointoken.file.path  (Default: "/var/run/secrets")
    The path to the join tokens

--jointoken.kubernetes.namespace
    The kubernetes namespace of the join tokens

--jointoken.kubernetes.prefix
    The prefix for join token naming

--jointoken.swarm.certpath
    Path to the mTLS certificates

--jointoken.swarm.endpoint
    Endpoint to use to access the swarm API

--jointoken.swarm.prefix
    The prefix for join token naming

--jointoken.value
    The value of the join token

--log.filepath
    Log file path. Stdout is used when omitted or empty.

--log.format
    Log format: json | common

--log.level
    Log level set to restrict logs to logs.

--name  (Default: "hostname reported by the kernel")
    Name of the node

--statedir  (Default: "/var/lib/traefikee")
    Path to the state directory

Get Join Tokens (tokens)

This command prints the Join Tokens of the cluster.

Usage:

traefikee token

Flags:

--format  (Default: "env")
    The output format (json | yaml | toml | env)

--socket
    Path to the Traefik Enterprise socket

Recover a Cluster (recover)

This command recovers a cluster that has lost quorum.

Usage:

traefikee recover

Flags:

--socket
    Path to the Traefik Enterprise socket

Get Health Status (healthcheck)

This command checks the health of an ingress node.

Usage:

traefikee healthcheck

Flags:

--accesslog  (Default: "false")
    Access log settings.

--accesslog.bufferingsize  (Default: "0")
    Number of access log lines to process in a buffered way.

--accesslog.fields.defaultmode  (Default: "keep")
    Default mode for fields: keep | drop

--accesslog.fields.headers.defaultmode  (Default: "drop")
    Default mode for fields: keep | drop | redact

--accesslog.fields.headers.names.<name>  (Default: "")
    Override mode for headers

--accesslog.fields.names.<name>  (Default: "")
    Override mode for fields

--accesslog.filepath  (Default: "")
    Access log file path. Stdout is used when omitted or empty.

--accesslog.filters.minduration  (Default: "0")
    Keep access logs when request took longer than the specified duration.

--accesslog.filters.retryattempts  (Default: "false")
    Keep access logs when at least one retry happened.

--accesslog.filters.statuscodes  (Default: "")
    Keep access logs with status codes in the specified range.

--accesslog.format  (Default: "common")
    Access log format: json | common

--api  (Default: "false")
    Enable api/dashboard.

--api.dashboard  (Default: "true")
    Activate dashboard.

--api.debug  (Default: "false")
    Enable additional endpoints for debugging and profiling.

--api.insecure  (Default: "false")
    Activate API directly on the entryPoint named traefik.

--certificatesresolvers.<name>  (Default: "false")
    Certificates resolvers configuration.

--certificatesresolvers.<name>.acme.caserver  (Default: "https://acme-v02.api.letsencrypt.org/directory")
    CA server to use.

--certificatesresolvers.<name>.acme.dnschallenge  (Default: "false")
    Activate DNS-01 Challenge.

--certificatesresolvers.<name>.acme.dnschallenge.delaybeforecheck  (Default: "0")
    Assume DNS propagates after a delay in seconds rather than finding and querying
    nameservers.

--certificatesresolvers.<name>.acme.dnschallenge.disablepropagationcheck  (Default: "false")
    Disable the DNS propagation checks before notifying ACME that the DNS challenge
    is ready. [not recommended]

--certificatesresolvers.<name>.acme.dnschallenge.provider  (Default: "")
    Use a DNS-01 based challenge provider rather than HTTPS.

--certificatesresolvers.<name>.acme.dnschallenge.resolvers  (Default: "")
    Use following DNS servers to resolve the FQDN authority.

--certificatesresolvers.<name>.acme.email  (Default: "")
    Email address used for registration.

--certificatesresolvers.<name>.acme.httpchallenge  (Default: "false")
    Activate HTTP-01 Challenge.

--certificatesresolvers.<name>.acme.httpchallenge.entrypoint  (Default: "")
    HTTP challenge EntryPoint

--certificatesresolvers.<name>.acme.keytype  (Default: "RSA4096")
    KeyType used for generating certificate private key. Allow value 'EC256',
    'EC384', 'RSA2048', 'RSA4096', 'RSA8192'.

--certificatesresolvers.<name>.acme.preferredchain  (Default: "")
    Preferred chain to use.

--certificatesresolvers.<name>.acme.storage  (Default: "acme.json")
    Storage to use.

--certificatesresolvers.<name>.acme.tlschallenge  (Default: "true")
    Activate TLS-ALPN-01 Challenge.

--certificatesresolvers.<name>.vault.enginepath  (Default: "pki")
    Path under which the Vault PKI secret engine is enabled

--certificatesresolvers.<name>.vault.role  (Default: "")
    Role to be used to issue certificates

--certificatesresolvers.<name>.vault.token  (Default: "")
    Token used to authenticate with Vault

--certificatesresolvers.<name>.vault.url  (Default: "")
    URL of the Vault server

--entrypoints.<name>  (Default: "false")
    Entry points definition.

--entrypoints.<name>.address  (Default: "")
    Entry point address.

--entrypoints.<name>.forwardedheaders.insecure  (Default: "false")
    Trust all forwarded headers.

--entrypoints.<name>.forwardedheaders.trustedips  (Default: "")
    Trust only forwarded headers from selected IPs.

--entrypoints.<name>.http  (Default: "")
    HTTP configuration.

--entrypoints.<name>.http.middlewares  (Default: "")
    Default middlewares for the routers linked to the entry point.

--entrypoints.<name>.http.redirections.entrypoint.permanent  (Default: "true")
    Applies a permanent redirection.

--entrypoints.<name>.http.redirections.entrypoint.priority  (Default: "2147483647")
    Priority of the generated router.

--entrypoints.<name>.http.redirections.entrypoint.scheme  (Default: "https")
    Scheme used for the redirection.

--entrypoints.<name>.http.redirections.entrypoint.to  (Default: "")
    Targeted entry point of the redirection.

--entrypoints.<name>.http.tls  (Default: "false")
    Default TLS configuration for the routers linked to the entry point.

--entrypoints.<name>.http.tls.certresolver  (Default: "")
    Default certificate resolver for the routers linked to the entry point.

--entrypoints.<name>.http.tls.domains  (Default: "")
    Default TLS domains for the routers linked to the entry point.

--entrypoints.<name>.http.tls.domains[n].main  (Default: "")
    Default subject name.

--entrypoints.<name>.http.tls.domains[n].sans  (Default: "")
    Subject alternative names.

--entrypoints.<name>.http.tls.options  (Default: "")
    Default TLS options for the routers linked to the entry point.

--entrypoints.<name>.proxyprotocol  (Default: "false")
    Proxy-Protocol configuration.

--entrypoints.<name>.proxyprotocol.insecure  (Default: "false")
    Trust all.

--entrypoints.<name>.proxyprotocol.trustedips  (Default: "")
    Trust only selected IPs.

--entrypoints.<name>.transport.lifecycle.gracetimeout  (Default: "10")
    Duration to give active requests a chance to finish before Traefik stops.

--entrypoints.<name>.transport.lifecycle.requestacceptgracetimeout  (Default: "0")
    Duration to keep accepting requests before Traefik initiates the graceful
    shutdown procedure.

--entrypoints.<name>.transport.respondingtimeouts.idletimeout  (Default: "180")
    IdleTimeout is the maximum amount duration an idle (keep-alive) connection will
    remain idle before closing itself. If zero, no timeout is set.

--entrypoints.<name>.transport.respondingtimeouts.readtimeout  (Default: "0")
    ReadTimeout is the maximum duration for reading the entire request, including
    the body. If zero, no timeout is set.

--entrypoints.<name>.transport.respondingtimeouts.writetimeout  (Default: "0")
    WriteTimeout is the maximum duration before timing out writes of the response.
    If zero, no timeout is set.

--experimental.devplugin.gopath  (Default: "")
    plugin's GOPATH.

--experimental.devplugin.modulename  (Default: "")
    plugin's module name.

--experimental.plugins.<name>  (Default: "false")
    Plugins configuration.

--experimental.plugins.<name>.modulename  (Default: "")
    plugin's module name.

--experimental.plugins.<name>.version  (Default: "")
    plugin's version.

--global.checknewversion  (Default: "true")
    Periodically check if a new version has been released.

--global.sendanonymoususage
    Periodically send anonymous usage statistics. If the option is not specified, it
    will be enabled by default.

--hostresolver  (Default: "false")
    Enable CNAME Flattening.

--hostresolver.cnameflattening  (Default: "false")
    A flag to enable/disable CNAME flattening

--hostresolver.resolvconfig  (Default: "/etc/resolv.conf")
    resolv.conf used for DNS resolving

--hostresolver.resolvdepth  (Default: "5")
    The maximal depth of DNS recursive resolving

--log  (Default: "false")
    Traefik log settings.

--log.filepath  (Default: "")
    Traefik log file path. Stdout is used when omitted or empty.

--log.format  (Default: "common")
    Traefik log format: json | common

--log.level  (Default: "ERROR")
    Log level set to traefik logs.

--metrics.datadog  (Default: "false")
    Datadog metrics exporter type.

--metrics.datadog.addentrypointslabels  (Default: "true")
    Enable metrics on entry points.

--metrics.datadog.address  (Default: "localhost:8125")
    Datadog's address.

--metrics.datadog.addserviceslabels  (Default: "true")
    Enable metrics on services.

--metrics.datadog.pushinterval  (Default: "10")
    Datadog push interval.

--metrics.influxdb  (Default: "false")
    InfluxDB metrics exporter type.

--metrics.influxdb.addentrypointslabels  (Default: "true")
    Enable metrics on entry points.

--metrics.influxdb.address  (Default: "localhost:8089")
    InfluxDB address.

--metrics.influxdb.addserviceslabels  (Default: "true")
    Enable metrics on services.

--metrics.influxdb.database  (Default: "")
    InfluxDB database used when protocol is http.

--metrics.influxdb.password  (Default: "")
    InfluxDB password (only with http).

--metrics.influxdb.protocol  (Default: "udp")
    InfluxDB address protocol (udp or http).

--metrics.influxdb.pushinterval  (Default: "10")
    InfluxDB push interval.

--metrics.influxdb.retentionpolicy  (Default: "")
    InfluxDB retention policy used when protocol is http.

--metrics.influxdb.username  (Default: "")
    InfluxDB username (only with http).

--metrics.prometheus  (Default: "false")
    Prometheus metrics exporter type.

--metrics.prometheus.addentrypointslabels  (Default: "true")
    Enable metrics on entry points.

--metrics.prometheus.addserviceslabels  (Default: "true")
    Enable metrics on services.

--metrics.prometheus.buckets  (Default: "0.100000, 0.300000, 1.200000, 5.000000")
    Buckets for latency metrics.

--metrics.prometheus.entrypoint  (Default: "traefik")
    EntryPoint

--metrics.prometheus.manualrouting  (Default: "false")
    Manual routing

--metrics.statsd  (Default: "false")
    StatsD metrics exporter type.

--metrics.statsd.addentrypointslabels  (Default: "true")
    Enable metrics on entry points.

--metrics.statsd.address  (Default: "localhost:8125")
    StatsD address.

--metrics.statsd.addserviceslabels  (Default: "true")
    Enable metrics on services.

--metrics.statsd.prefix  (Default: "traefik")
    Prefix to use for metrics collection.

--metrics.statsd.pushinterval  (Default: "10")
    StatsD push interval.

--pilot.token  (Default: "")
    Traefik Pilot token.

--ping  (Default: "false")
    Enable ping.

--ping.entrypoint  (Default: "traefik")
    EntryPoint

--ping.manualrouting  (Default: "false")
    Manual routing

--ping.terminatingstatuscode  (Default: "503")
    Terminating status code

--providers.consul  (Default: "false")
    Enable Consul backend with default settings.

--providers.consul.endpoints  (Default: "127.0.0.1:8500")
    KV store endpoints

--providers.consul.password  (Default: "")
    KV Password

--providers.consul.rootkey  (Default: "traefik")
    Root key used for KV store

--providers.consul.tls.ca  (Default: "")
    TLS CA

--providers.consul.tls.caoptional  (Default: "false")
    TLS CA.Optional

--providers.consul.tls.cert  (Default: "")
    TLS cert

--providers.consul.tls.insecureskipverify  (Default: "false")
    TLS insecure skip verify

--providers.consul.tls.key  (Default: "")
    TLS key

--providers.consul.username  (Default: "")
    KV Username

--providers.consulcatalog.cache  (Default: "false")
    Use local agent caching for catalog reads.

--providers.consulcatalog.constraints  (Default: "")
    Constraints is an expression that Traefik matches against the container's labels
    to determine whether to create any route for that container.

--providers.consulcatalog.defaultrule  (Default: "Host(`{{ normalize .Name }}`)")
    Default rule.

--providers.consulcatalog.endpoint.address  (Default: "http://127.0.0.1:8500")
    The address of the Consul server

--providers.consulcatalog.endpoint.datacenter  (Default: "")
    Data center to use. If not provided, the default agent data center is used

--providers.consulcatalog.endpoint.endpointwaittime  (Default: "0")
    WaitTime limits how long a Watch will block. If not provided, the agent default
    values will be used

--providers.consulcatalog.endpoint.httpauth.password  (Default: "")
    Basic Auth password

--providers.consulcatalog.endpoint.httpauth.username  (Default: "")
    Basic Auth username

--providers.consulcatalog.endpoint.scheme  (Default: "")
    The URI scheme for the Consul server

--providers.consulcatalog.endpoint.tls.ca  (Default: "")
    TLS CA

--providers.consulcatalog.endpoint.tls.caoptional  (Default: "false")
    TLS CA.Optional

--providers.consulcatalog.endpoint.tls.cert  (Default: "")
    TLS cert

--providers.consulcatalog.endpoint.tls.insecureskipverify  (Default: "false")
    TLS insecure skip verify

--providers.consulcatalog.endpoint.tls.key  (Default: "")
    TLS key

--providers.consulcatalog.endpoint.token  (Default: "")
    Token is used to provide a per-request ACL token which overrides the agent's
    default token

--providers.consulcatalog.exposedbydefault  (Default: "true")
    Expose containers by default.

--providers.consulcatalog.prefix  (Default: "traefik")
    Prefix for consul service tags. Default 'traefik'

--providers.consulcatalog.refreshinterval  (Default: "15")
    Interval for check Consul API. Default 100ms

--providers.consulcatalog.requireconsistent  (Default: "false")
    Forces the read to be fully consistent.

--providers.consulcatalog.stale  (Default: "false")
    Use stale consistency for catalog reads.

--providers.docker  (Default: "false")
    Enable Docker backend with default settings.

--providers.docker.constraints  (Default: "")
    Constraints is an expression that Traefik matches against the container's labels
    to determine whether to create any route for that container.

--providers.docker.defaultrule  (Default: "Host(`{{ normalize .Name }}`)")
    Default rule.

--providers.docker.endpoint  (Default: "unix:///var/run/docker.sock")
    Docker server endpoint. Can be a tcp or a unix socket endpoint.

--providers.docker.exposedbydefault  (Default: "true")
    Expose containers by default.

--providers.docker.network  (Default: "")
    Default Docker network used.

--providers.docker.swarmmode  (Default: "false")
    Use Docker on Swarm Mode.

--providers.docker.swarmmoderefreshseconds  (Default: "15")
    Polling interval for swarm mode.

--providers.docker.tls.ca  (Default: "")
    TLS CA

--providers.docker.tls.caoptional  (Default: "false")
    TLS CA.Optional

--providers.docker.tls.cert  (Default: "")
    TLS cert

--providers.docker.tls.insecureskipverify  (Default: "false")
    TLS insecure skip verify

--providers.docker.tls.key  (Default: "")
    TLS key

--providers.docker.usebindportip  (Default: "false")
    Use the ip address from the bound port, rather than from the inner network.

--providers.docker.watch  (Default: "true")
    Watch Docker Swarm events.

--providers.ecs.accesskeyid  (Default: "")
    The AWS credentials access key to use for making requests

--providers.ecs.autodiscoverclusters  (Default: "false")
    Auto discover cluster

--providers.ecs.clusters  (Default: "default")
    ECS Clusters name

--providers.ecs.constraints  (Default: "")
    Constraints is an expression that Traefik matches against the container's labels
    to determine whether to create any route for that container.

--providers.ecs.defaultrule  (Default: "Host(`{{ normalize .Name }}`)")
    Default rule.

--providers.ecs.exposedbydefault  (Default: "true")
    Expose services by default

--providers.ecs.refreshseconds  (Default: "15")
    Polling interval (in seconds)

--providers.ecs.region  (Default: "")
    The AWS region to use for requests

--providers.ecs.secretaccesskey  (Default: "")
    The AWS credentials access key to use for making requests

--providers.etcd  (Default: "false")
    Enable Etcd backend with default settings.

--providers.etcd.endpoints  (Default: "127.0.0.1:2379")
    KV store endpoints

--providers.etcd.password  (Default: "")
    KV Password

--providers.etcd.rootkey  (Default: "traefik")
    Root key used for KV store

--providers.etcd.tls.ca  (Default: "")
    TLS CA

--providers.etcd.tls.caoptional  (Default: "false")
    TLS CA.Optional

--providers.etcd.tls.cert  (Default: "")
    TLS cert

--providers.etcd.tls.insecureskipverify  (Default: "false")
    TLS insecure skip verify

--providers.etcd.tls.key  (Default: "")
    TLS key

--providers.etcd.username  (Default: "")
    KV Username

--providers.file.debugloggeneratedtemplate  (Default: "false")
    Enable debug logging of generated configuration template.

--providers.file.directory  (Default: "")
    Load dynamic configuration from one or more .toml or .yml files in a directory.

--providers.file.filename  (Default: "")
    Load dynamic configuration from a file.

--providers.file.watch  (Default: "true")
    Watch provider.

--providers.http  (Default: "false")
    Enable HTTP backend with default settings.

--providers.http.endpoint  (Default: "")
    Load configuration from this endpoint.

--providers.http.pollinterval  (Default: "5")
    Polling interval for endpoint.

--providers.http.polltimeout  (Default: "5")
    Polling timeout for endpoint.

--providers.http.tls.ca  (Default: "")
    TLS CA

--providers.http.tls.caoptional  (Default: "false")
    TLS CA.Optional

--providers.http.tls.cert  (Default: "")
    TLS cert

--providers.http.tls.insecureskipverify  (Default: "false")
    TLS insecure skip verify

--providers.http.tls.key  (Default: "")
    TLS key

--providers.kubernetescrd  (Default: "false")
    Enable Kubernetes backend with default settings.

--providers.kubernetescrd.certauthfilepath  (Default: "")
    Kubernetes certificate authority file path (not needed for in-cluster client).

--providers.kubernetescrd.disablepasshostheaders  (Default: "false")
    Kubernetes disable PassHost Headers.

--providers.kubernetescrd.endpoint  (Default: "")
    Kubernetes server endpoint (required for external cluster client).

--providers.kubernetescrd.ingressclass  (Default: "")
    Value of kubernetes.io/ingress.class annotation to watch for.

--providers.kubernetescrd.labelselector  (Default: "")
    Kubernetes label selector to use.

--providers.kubernetescrd.namespaces  (Default: "")
    Kubernetes namespaces.

--providers.kubernetescrd.throttleduration  (Default: "0")
    Ingress refresh throttle duration

--providers.kubernetescrd.token  (Default: "")
    Kubernetes bearer token (not needed for in-cluster client).

--providers.kubernetesingress  (Default: "false")
    Enable Kubernetes backend with default settings.

--providers.kubernetesingress.certauthfilepath  (Default: "")
    Kubernetes certificate authority file path (not needed for in-cluster client).

--providers.kubernetesingress.disablepasshostheaders  (Default: "false")
    Kubernetes disable PassHost Headers.

--providers.kubernetesingress.endpoint  (Default: "")
    Kubernetes server endpoint (required for external cluster client).

--providers.kubernetesingress.ingressclass  (Default: "")
    Value of kubernetes.io/ingress.class annotation to watch for.

--providers.kubernetesingress.ingressendpoint.hostname  (Default: "")
    Hostname used for Kubernetes Ingress endpoints.

--providers.kubernetesingress.ingressendpoint.ip  (Default: "")
    IP used for Kubernetes Ingress endpoints.

--providers.kubernetesingress.ingressendpoint.publishedservice  (Default: "")
    Published Kubernetes Service to copy status from.

--providers.kubernetesingress.labelselector  (Default: "")
    Kubernetes Ingress label selector to use.

--providers.kubernetesingress.namespaces  (Default: "")
    Kubernetes namespaces.

--providers.kubernetesingress.throttleduration  (Default: "0")
    Ingress refresh throttle duration

--providers.kubernetesingress.token  (Default: "")
    Kubernetes bearer token (not needed for in-cluster client).

--providers.marathon  (Default: "false")
    Enable Marathon backend with default settings.

--providers.marathon.basic.httpbasicauthuser  (Default: "")
    Basic authentication User.

--providers.marathon.basic.httpbasicpassword  (Default: "")
    Basic authentication Password.

--providers.marathon.constraints  (Default: "")
    Constraints is an expression that Traefik matches against the application's
    labels to determine whether to create any route for that application.

--providers.marathon.dcostoken  (Default: "")
    DCOSToken for DCOS environment, This will override the Authorization header.

--providers.marathon.defaultrule  (Default: "Host(`{{ normalize .Name }}`)")
    Default rule.

--providers.marathon.dialertimeout  (Default: "5")
    Set a dialer timeout for Marathon.

--providers.marathon.endpoint  (Default: "http://127.0.0.1:8080")
    Marathon server endpoint. You can also specify multiple endpoint for Marathon.

--providers.marathon.exposedbydefault  (Default: "true")
    Expose Marathon apps by default.

--providers.marathon.forcetaskhostname  (Default: "false")
    Force to use the task's hostname.

--providers.marathon.keepalive  (Default: "10")
    Set a TCP Keep Alive time.

--providers.marathon.respectreadinesschecks  (Default: "false")
    Filter out tasks with non-successful readiness checks during deployments.

--providers.marathon.responseheadertimeout  (Default: "60")
    Set a response header timeout for Marathon.

--providers.marathon.tls.ca  (Default: "")
    TLS CA

--providers.marathon.tls.caoptional  (Default: "false")
    TLS CA.Optional

--providers.marathon.tls.cert  (Default: "")
    TLS cert

--providers.marathon.tls.insecureskipverify  (Default: "false")
    TLS insecure skip verify

--providers.marathon.tls.key  (Default: "")
    TLS key

--providers.marathon.tlshandshaketimeout  (Default: "5")
    Set a TLS handshake timeout for Marathon.

--providers.marathon.trace  (Default: "false")
    Display additional provider logs.

--providers.marathon.watch  (Default: "true")
    Watch provider.

--providers.plugin.vault.enginepath  (Default: "secret")
    Path under which the KV secret engine is enabled

--providers.plugin.vault.rescaninterval  (Default: "60")
    Interval to rescan all certificates for changes

--providers.plugin.vault.syncinterval  (Default: "5")
    Interval to synchronize new and deleted certificates

--providers.plugin.vault.token  (Default: "")
    Token used to authenticate with the API

--providers.plugin.vault.url  (Default: "")
    URL of the Vault API

--providers.providersthrottleduration  (Default: "2")
    Backends throttle duration: minimum duration between 2 events from providers
    before applying a new configuration. It avoids unnecessary reloads if multiples
    events are sent in a short amount of time.

--providers.rancher  (Default: "false")
    Enable Rancher backend with default settings.

--providers.rancher.constraints  (Default: "")
    Constraints is an expression that Traefik matches against the container's labels
    to determine whether to create any route for that container.

--providers.rancher.defaultrule  (Default: "Host(`{{ normalize .Name }}`)")
    Default rule.

--providers.rancher.enableservicehealthfilter  (Default: "true")
    Filter services with unhealthy states and inactive states.

--providers.rancher.exposedbydefault  (Default: "true")
    Expose containers by default.

--providers.rancher.intervalpoll  (Default: "false")
    Poll the Rancher metadata service every 'rancher.refreshseconds' (less
    accurate).

--providers.rancher.prefix  (Default: "latest")
    Prefix used for accessing the Rancher metadata service.

--providers.rancher.refreshseconds  (Default: "15")
    Defines the polling interval in seconds.

--providers.rancher.watch  (Default: "true")
    Watch provider.

--providers.redis  (Default: "false")
    Enable Redis backend with default settings.

--providers.redis.endpoints  (Default: "127.0.0.1:6379")
    KV store endpoints

--providers.redis.password  (Default: "")
    KV Password

--providers.redis.rootkey  (Default: "traefik")
    Root key used for KV store

--providers.redis.tls.ca  (Default: "")
    TLS CA

--providers.redis.tls.caoptional  (Default: "false")
    TLS CA.Optional

--providers.redis.tls.cert  (Default: "")
    TLS cert

--providers.redis.tls.insecureskipverify  (Default: "false")
    TLS insecure skip verify

--providers.redis.tls.key  (Default: "")
    TLS key

--providers.redis.username  (Default: "")
    KV Username

--providers.rest  (Default: "false")
    Enable Rest backend with default settings.

--providers.rest.insecure  (Default: "false")
    Activate REST Provider directly on the entryPoint named traefik.

--providers.zookeeper  (Default: "false")
    Enable ZooKeeper backend with default settings.

--providers.zookeeper.endpoints  (Default: "127.0.0.1:2181")
    KV store endpoints

--providers.zookeeper.password  (Default: "")
    KV Password

--providers.zookeeper.rootkey  (Default: "traefik")
    Root key used for KV store

--providers.zookeeper.tls.ca  (Default: "")
    TLS CA

--providers.zookeeper.tls.caoptional  (Default: "false")
    TLS CA.Optional

--providers.zookeeper.tls.cert  (Default: "")
    TLS cert

--providers.zookeeper.tls.insecureskipverify  (Default: "false")
    TLS insecure skip verify

--providers.zookeeper.tls.key  (Default: "")
    TLS key

--providers.zookeeper.username  (Default: "")
    KV Username

--serverstransport.forwardingtimeouts.dialtimeout  (Default: "30")
    The amount of time to wait until a connection to a backend server can be
    established. If zero, no timeout exists.

--serverstransport.forwardingtimeouts.idleconntimeout  (Default: "90")
    The maximum period for which an idle HTTP keep-alive connection will remain open
    before closing itself

--serverstransport.forwardingtimeouts.responseheadertimeout  (Default: "0")
    The amount of time to wait for a server's response headers after fully writing
    the request (including its body, if any). If zero, no timeout exists.

--serverstransport.insecureskipverify  (Default: "false")
    Disable SSL certificate verification.

--serverstransport.maxidleconnsperhost  (Default: "200")
    If non-zero, controls the maximum idle (keep-alive) to keep per-host. If zero,
    DefaultMaxIdleConnsPerHost is used

--serverstransport.rootcas  (Default: "")
    Add cert file for self-signed certificate.

--tracing  (Default: "false")
    OpenTracing configuration.

--tracing.datadog  (Default: "false")
    Settings for Datadog.

--tracing.datadog.bagageprefixheadername  (Default: "")
    Specifies the header name prefix that will be used to store baggage items in a
    map.

--tracing.datadog.debug  (Default: "false")
    Enable Datadog debug.

--tracing.datadog.globaltag  (Default: "")
    Key:Value tag to be set on all the spans.

--tracing.datadog.localagenthostport  (Default: "localhost:8126")
    Set datadog-agent's host:port that the reporter will used.

--tracing.datadog.parentidheadername  (Default: "")
    Specifies the header name that will be used to store the parent ID.

--tracing.datadog.prioritysampling  (Default: "false")
    Enable priority sampling. When using distributed tracing, this option must be
    enabled in order to get all the parts of a distributed trace sampled.

--tracing.datadog.samplingpriorityheadername  (Default: "")
    Specifies the header name that will be used to store the sampling priority.

--tracing.datadog.traceidheadername  (Default: "")
    Specifies the header name that will be used to store the trace ID.

--tracing.elastic  (Default: "false")
    Settings for Elastic.

--tracing.elastic.secrettoken  (Default: "")
    Set the token used to connect to Elastic APM Server.

--tracing.elastic.serverurl  (Default: "")
    Set the URL of the Elastic APM server.

--tracing.elastic.serviceenvironment  (Default: "")
    Set the name of the environment Traefik is deployed in, e.g. 'production' or
    'staging'.

--tracing.haystack  (Default: "false")
    Settings for Haystack.

--tracing.haystack.baggageprefixheadername  (Default: "")
    Specifies the header name prefix that will be used to store baggage items in a
    map.

--tracing.haystack.globaltag  (Default: "")
    Key:Value tag to be set on all the spans.

--tracing.haystack.localagenthost  (Default: "127.0.0.1")
    Set haystack-agent's host that the reporter will used.

--tracing.haystack.localagentport  (Default: "35000")
    Set haystack-agent's port that the reporter will used.

--tracing.haystack.parentidheadername  (Default: "")
    Specifies the header name that will be used to store the parent ID.

--tracing.haystack.spanidheadername  (Default: "")
    Specifies the header name that will be used to store the span ID.

--tracing.haystack.traceidheadername  (Default: "")
    Specifies the header name that will be used to store the trace ID.

--tracing.instana  (Default: "false")
    Settings for Instana.

--tracing.instana.localagenthost  (Default: "")
    Set instana-agent's host that the reporter will used.

--tracing.instana.localagentport  (Default: "42699")
    Set instana-agent's port that the reporter will used.

--tracing.instana.loglevel  (Default: "info")
    Set instana-agent's log level. ('error','warn','info','debug')

--tracing.jaeger  (Default: "false")
    Settings for Jaeger.

--tracing.jaeger.collector.endpoint  (Default: "")
    Instructs reporter to send spans to jaeger-collector at this URL.

--tracing.jaeger.collector.password  (Default: "")
    Password for basic http authentication when sending spans to jaeger-collector.

--tracing.jaeger.collector.user  (Default: "")
    User for basic http authentication when sending spans to jaeger-collector.

--tracing.jaeger.disableattemptreconnecting  (Default: "true")
    Disable the periodic re-resolution of the agent's hostname and reconnection if
    there was a change.

--tracing.jaeger.gen128bit  (Default: "false")
    Generate 128 bit span IDs.

--tracing.jaeger.localagenthostport  (Default: "127.0.0.1:6831")
    Set jaeger-agent's host:port that the reporter will used.

--tracing.jaeger.propagation  (Default: "jaeger")
    Which propagation format to use (jaeger/b3).

--tracing.jaeger.samplingparam  (Default: "1.000000")
    Set the sampling parameter.

--tracing.jaeger.samplingserverurl  (Default: "http://localhost:5778/sampling")
    Set the sampling server url.

--tracing.jaeger.samplingtype  (Default: "const")
    Set the sampling type.

--tracing.jaeger.tracecontextheadername  (Default: "uber-trace-id")
    Set the header to use for the trace-id.

--tracing.servicename  (Default: "traefik")
    Set the name for this service.

--tracing.spannamelimit  (Default: "0")
    Set the maximum character limit for Span names (default 0 = no limit).

--tracing.zipkin  (Default: "false")
    Settings for Zipkin.

--tracing.zipkin.httpendpoint  (Default: "http://localhost:9411/api/v2/spans")
    HTTP Endpoint to report traces to.

--tracing.zipkin.id128bit  (Default: "true")
    Use Zipkin 128 bit root span IDs.

--tracing.zipkin.samespan  (Default: "false")
    Use Zipkin SameSpan RPC style traces.

--tracing.zipkin.samplerate  (Default: "1.000000")
    The rate between 0.0 and 1.0 of requests to trace.

Show the Version (version)

This command shows the Traefik Enterprise version.

Usage:

traefikee version